1. Add it to Chrome
Install FlipperTools and switch on “Mercari 4×6 Labels”.
Mercari has a 4×6 paper size, but it’s saved per order, and return labels and older labels still come out full-page. Here’s the setting. Our free Chrome extension crops the rest to 4×6.
On the order, go to Shipping information → Label → Set paper size → 4×6 and save. Mercari remembers that for the order, so the label comes out ready for a thermal printer.
Install FlipperTools and switch on “Mercari 4×6 Labels”.
Download the label from the order on mercari.com. Full-page labels open already cropped.
Hit Print. One sharp label, barcode at full size, ready for your thermal printer.
Your label is processed inside your browser. Your buyer’s address is never uploaded. Labels are cropped as vectors, so barcodes stay crisp and scan first time.
| Paper / label size | 4×6 in (or 100×150 mm) |
|---|---|
| Orientation | Portrait |
| Scale | 100% / “Actual size”, not “Fit to page” |
| Margins | None |
| Pages | All (one label per page) |
Still printing onto two labels? Set the scale to 95%. A hair of white border keeps everything on one label.
The screenshot route works, but it’s lower resolution than the original PDF, so barcodes can scan badly. The extension crops the PDF itself, so nothing gets blurry.
Open the order, go to Shipping information → Label → Set paper size, choose 4×6 and save. The label is then generated at 4×6 for your thermal printer.
The paper size is saved on the order, so a label generated at 8.5×11 stays that way. Return labels and labels you downloaded before changing the size are the usual culprits. The FlipperTools extension crops those to 4×6.
It’s a mix of the paper size saved on the Mercari order and your print settings. Use a 4×6 label, then print at 100% scale with no margins, not “fit to page”.
Yes. The cropper outputs a standard 4×6 inch PDF that any 4×6 thermal label printer can print.
It’s free with no account, and the label is cropped inside your own browser. Your buyer’s address never leaves your computer.
No account needed. Switch on only the tools you want.